Editor choice

Best Cold Air Intake For 6.0 Vortec That Will Increase Your Horsepower – Best Buyer’s Guide

Best Cold Air Intake For 6.0 VortecIf you have been searching for the best cold air intake for your 6.0 Vortec engine, then you already know how hard it can be to sift through all the various brands and models on the market.

Every product claims to be the best for a different reason, so how do you know which one is really worth it? Well, we are here to help you figure that out.

We have taken a look at a number of different products on the market and have narrowed down the best options into a concise list.

These great options give you everything that you are looking for in a cold air intake system, and are well worth the cost, so you know you’re getting the best of the best.

Top pick
K&N Engineering 77-3076KTK

Although every one of the options on this list has great features that make it a good choice, there is one that pulls ahead of the pack. That is why our top pick is the K&N Engineering 77-3076KTK.

This option has an estimated gain of up to 10.23 horsepower and installs in 90 minutes or less, making it the cream of the crop.

K&N Engineering 77-3076KTK

  • Clamp made from stainless steel
  • Estimated horsepower gain of 10.23
  • Installs in less than 90 minutes
  • Replaces entire factory air intake system
  • Can reach up to 100,000 miles without needing service

Check now

With all these great features, it is easy to see why we chose this model as our top pick. From the easy installation to the ability to replace the entire factory air intake system, this cold air intake system has it all. With the ability to do just about anything, the only thing that this system can’t do is install itself for you.

Cold Air Intakes For 6.0 Vortec Comparison Chart

Char

K&N Engineering 77-3076KTK

K&N 63-3082

BLACKHORSE-RACING ER38001-1

Photo

K&N Engineering 77-3076KTK

K&N 63-3082

BLACKHORSE-RACING ER38001-1

Estimated Horsepower Gain

10.23 HP @ 5033 RPM

10.68 HP @ 5341 RPM

n/a

Air Filter Height

6.5"

7.5"

6.7"

Intake Pipe Material

Aluminum

High-Density Cross-Linked Polyethylene

T-306 Aluminum

Dyno-Tested

Yes

Yes

n/a

Mounting Hardware Included

Yes

Yes

Yes

Warranty

1,000,000 Miles/10 Year

1,000,000 Miles/10 Year

n/a

Check Price

Check Price

Check Price

3 Best Cold Air Intakes For 6.0 Vortec (as of November, 2019):

1. K&N Engineering 77-3076KTK Cold Air Intake For 6.0 Vortec – Best Top Pick Review

K&N Engineering 77-3076KTKThis option, as mentioned above, is our top pick because it has many great features.

With the stainless clamp and the easy installation, this product will give you the increase in horsepower that you want out of a cold air intake system.

Increases Horsepower

K&N Engineering 77-3076KTK is designed to drastically reduce airflow restriction as it smoothes and straightens out the airflow.

This new and improved airflow allows your 6.0 Vortec engine to take in a larger amount of air than it would from the stock air intake.

Being able to take in more air means more that it will have more usable power and better acceleration throughout the engine’s RPM range.

Improves Throttle Response

This model improves the throttle response on your vehicle so that you will get a mean growling sound during acceleration. This is done by removing the stock baffles and soundproofing components from your engines bay.

K&N Engineering 77-3076KTK Review, Pros and Cons

100,000 Miles Without Servicing

This cold air intake system uses an oversized cone shaped air filter that lasts for up to 100,000 miles before servicing is needed, depending on exact driving conditions. This saves you money on taking your car into the shop, and it makes for less headache.

Easy Installation

This system is easy to install and can be done in less than 90 minutes in total. This saves you lots of time fumbling with tools to get the job done. It also does not require special tools for installation and uses existing factory mounting points.

K&N Engineering 77-3076KTK system is easy to install and can be done in less than 90 minutes in total

Durable

This cold air intake system is built for durability with its free-flowing, mandrel-bent aluminum tube air deduction system. This lightweight aluminum helps this system to last you many miles without having to worry about damage or wear and tear.

Main Features

  • Guaranteed to increase horsepower and torque
  • Mandrel-bent aluminum intake tube paired with oversized oiled cotton air filter
  • Engineered to provide high airflow and exceptional filtration
  • Replaces factory air filter and intake tube
  • Filter only requires cleaning every 100,000 miles under normal highway driving conditions
  • Typical installation can be completed in 90 minutes or less with simple hand tools
  • Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
  • Will not void vehicle warranty
PROS:
  • Reduces airflow restriction to increase horsepower
  • Improves throttle response and produces more sound
  • Can last for up to 100,000 miles without servicing
  • Installation that can be done in less than 90 minutes
  • Aluminum tube for lightweight build and durability

CONS:
  • You must check online to see if your state allows for this system, not all are state legal

2. K&N 63-3082 Cold Air Intake For 6.0 Vortec – Best Red Filter Intake System Review

K&N 63-3082This is the second cold air intake of K&N brand that is on the list, but it has earned its place.

With its high-density polyurethane tube and cotton gauze air filter, this K&N 63-3082 system gives you the increased horsepower and better gas mileage that you’ve been looking for.

Increases Horsepower

This K&N option is designed to drastically reduce airflow restriction as it smoothes and straightens out the airflow. This new and improved airflow allows your 6.0 Vortec engine to take in a larger amount of air than it would from the stock air intake.

K&N 63-3082 system is designed to drastically reduce airflow restriction

Being able to take in more air means more that it will have more usable power and better acceleration throughout the engine’s RPM range.

100,000 Miles Without Servicing

This cold air intake system also uses an oversized cone shaped air filter that lasts for up to 100,000 miles before servicing is needed, depending on exact driving conditions.

This saves you money on taking your car into the shop, and it makes for less headache when cleaning the air filter.

K&N 63-3082 Review, Pros and Cons

Easy Installation

This system is easy to install and can be done in less than 90 minutes in total. This saves you lots of time fumbling with tools to get the job done. It also does not require special tools for installation and uses existing factory mounting points.

Improves Throttle Response

This K&N red filter model improves the throttle response on your vehicle so that you will get better growling sounds during acceleration. This is done by removing the stock baffles and soundproofing components from your engine’s bay to allow for a bigger noise when stepping on the gas.

Better Airflow

This model comes with a free-flowing, high-density polyethylene tube that allows for better airflow through the filtration system. This dense polyurethane material is also built to last so that you won’t have to worry about replacing it anytime soon.

Main Features

  • Guaranteed to increase horsepower and torque
  • Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
  • Engineered to provide high airflow and exceptional filtration
  • Replaces factory air filter and intake tube
  • Filter only requires cleaning every 100,000 miles under normal highway driving conditions
  • Typical installation can be completed in 90 minutes or less with simple hand tools
  • Will not void vehicle warranty
PROS:
  • Increase horsepower and acceleration by offering more airflow
  • Can go 100,000 miles without needing servicing, less cleaning of air filter
  • Improves throttle response and gives bigger sound during acceleration
  • Free-flowing, high-density polyurethane tube for better airflow and durability
  • Installs in under 90 minutes without specialty tools

CONS:
  • Not legal for use in states with California’s emissions standards
  • Long term durability is in question due to negative customer reviews

K&N 63-3082 install:

3. BLACKHORSE-RACING ER38001-1 Cold Air Intake For 6.0 Vortec – Best Heat Shield Filter System Review

BLACKHORSE-RACING ER38001-1This BLACKHORSE-RACING ER38001-1 racing cold air intake filter with heat shield is a great option that will help your engine draw in more cool air for increased horsepower and better performance.

This great option will help you get more out of your 6.0 Vortec engine and make it roar.

Better Airflow With Added Heat Shield

This Blackhorse option offers your engine better airflow by drawing in more cool air through the system.

The added heat shield offers added cooling by keeping the running of your vehicle from heating the air as you drive, which keeps the air cooler even during long drives.

Wide Compatibility

This cold air intake system fits a wide range of vehicles and can be fitted to manual and automatic transmission systems. This allows you to install this system on many different vehicles without any fit issues.

The BLACKHORSE-RACING ER38001-1 cold air intake system fits a wide range of vehicles

Easy Installation

This option is simple to install and can be done at home, without professional help. The system can also be installed with common tools and does not require special equipment. The air filters are washable and reusable so you don’t have to replace it.

BLACKHORSE-RACING ER38001-1 Review, Pros and Cons

Increases Horsepower

This cold air intake system increases airflow which allows your vehicle to have up to 10 percent more horsepower and 10 percent more torque. It also helps create a much louder sound when accelerating so that you can hear the power.

Main Features

  • It’s the ultimate performance Cold Air Intake Kit with Heat Shield
  • The air intake kit can help your engine to draw in more cold air resulting in better throttle response and higher explosive horsepower output
  • The kit includes a steel heat shield that features a durable carbon-black powder coating
  • T-306 Aluminum Polished Finished Intake pipe
  • The heat shield protects the filter from dirt and debris
  • It can increase 8-10% of Horsepower and 6-8% of torque
  • Easy to install and easy to fit with simple tools
  • Professional installation is highly recommended
  • For 1999 2000 2001 2002 2003 2004 2005 2006 V8 4.8L/5.3L/6.0L(Don’t fit 2006 ford f250 lariat 6.0)
PROS:
  • Better airflow and cool air with added heat shield for extra cooling power
  • Wide compatibility with the ability to work with many different transmission systems
  • Easy installation that can be done at home, without specialty tools
  • Air filters are washable and reusable
  • Increases horsepower and torque up to 10 percent
  • Increases sound of acceleration

CONS:
  • You must check for state regulations for legal use
  • Reliability in question due to negative customer reviews
  • Fit and alignment of bolt holes have been known to be incorrect

Buyer’s Guide

With all this information about these three products thrown at you, it might be a lot to take in. Before making a final decision about which item you want to purchase for your vehicle, you want to make sure that you are fully knowledgeable.

So, there may be some questions that you have about cold air intake systems that you want answering before forking over the cash for one of these systems. You are not alone.

We have put together a list of some of the most commonly asked questions about these products and found answers. So, here are the most frequently asked questions about cold air intake systems.

Does installing a cold air intake system really make a difference?

Overwhelmingly, the answer is yes. Although this may sound like a product that is too good to be true, the facts show that there is a tangible difference in a vehicle after installing one of these systems.

You will hear a difference in the sound when accelerating, and you can feel the increase in horsepower while you are driving. When paired with other added systems, the difference can be felt even more.

Can a cold air intake system damage your engine?

No. These systems cool down the air that is filtered through your engine and help keep it running at a lower temperature which can help your engine run more smoothly.

This can increase airflow, fuel efficiency, horsepower, and torque. So, having a cold air intake system is actually beneficial in many ways and does not cause any damage to your engine.

If referring to installation, the answer is still no. To install many of these systems, it only takes a small amount of time and doesn’t require much engine know-how.

Cold Air Intake For 6.0 Vortec often do not require special tools for installation

Plus, because these systems often do not require special tools for installation, you won’t have to worry about incorrectly using a tool that you haven’t used before.

Can a cold air intake system give you better gas mileage?

Yes. These systems allow your engine to have a better airflow and help to make them run more efficiently. Therefore, your engine with use fuel more efficiently, resulting in better gas mileage overall.

Conclusion

When trying to find a good cold air intake system for your 6.0 Vortec engine, you may feel like there are too many to look at.

Well, this article showed you three of the best options on the market so that you can narrow down your options to those that are worth your time and money. With all three of these systems being reasonably priced as well, you can’t do wrong with any of these models.

Whether you decide to purchase one of the systems on this list, or you choose to continue searching for an option of your own, you now have the information to make an informed decision about which cold air intake system will be right for your vehicle so that you get the best option for your car.

Best Cold Air Intake For 6.0 Vortec

We will be happy to hear your thoughts

Leave a reply

My Garage Tool